For many homeowners, the development of rust on handrails in Melbourne is a very serious problem. And if you don't deal with the corrosion as soon as you notice it, the rust will begin to spread along the length of the rail. Not only does rust look extremely unattractive, it can actually pierce the skin of those using the stairs, resulting in the need for tetanus shots.
Step 1: Use a scraper and wire brush to scrape away any loose or bubbled paint and rust chippings. Make sure that you only scrape at the rusted sections of the handrail; you don’t want to damage the good metal.
Step 2: Put on a pair of non-porous gloves and safety goggles. Then, spray or coat handrails in Melbourne with a rust converter or neutralizer, being sure to follow all instructions provided by the manufacturer.
Step 3: Apply one or two coats of a rust-inhibiting primer to the area of the handrail that you have just removed rust from. Allow the first coat of primer to dry completely before applying the second.
Step 4: Paint over the primer with a paint that you have matched to the existing colour of your handrail. For a completely smooth finish, however, you will need to sand the entire rail back and repaint.
Whilst the best way to protect handrails in Melbourne from the development of rust is to take steps that will avoid corrosion from beginning, this is near impossible in most environments. Instead, you will be much better off keeping an eye on your rails and treating rust as soon as you notice it; this will ensure that the corrosion doesn't spread too far.